Mecanum Rover 3D Printer Model
The file 'Mecanum Rover 3D Printer Model' is (stl) file type, size is 535.0KB.
The file 'Mecanum Rover 3D Printer Model' is (stl) file type, size is 535.0KB.
This is a rover of the mecanam wheel.
ABS pipe to the barrel of the connection is required .
ABS pipe is the diameter 5mm, length 44mm.
Between the mecanum wheel and the DC motor is connected by M2 screw.
M2 X 6mm 4pices.
Between the motor holder and the DC motor is connected by M2 bolt.
M2 X 25mm 8pices.
M2 X 20mm 4pices.
If you want to put a different form of the motor.
Please be self-made.
Octagonal wheel is diameter 30mm, thickness 34mm.
this software(esp8266-arduino) free download.
https://github.com/arrowmeiwaracing/mecanumrover
How to install.
http://www.instructables.com/id/3D-Printed-Rover-Will-Be-IoT/
youtube video
https://youtu.be/XEG3z9zUtfU
https://youtu.be/tKZbYW__Lpk
| bar.stl | 15.9KB | |
| center_yellow.stl | 140.1KB | |
| frmL.stl | 259.7KB | |
| frmR.stl | 259.7KB | |
| koro.stl | 553.8KB | |
| motorL.stl | 204.7KB | |
| motorR.stl | 204.7KB |
