Measurement Rods – 4,10mm – 4,55mm 3D Printer Model
The file 'Measurement Rods – 4,10mm – 4,55mm 3D Printer Model' is (stl) file type, size is 311.9KB.
The file 'Measurement Rods – 4,10mm – 4,55mm 3D Printer Model' is (stl) file type, size is 311.9KB.
I needed to measure the inside of some pipes that seemed to vary slightly in diameter and this was the best thing i could come up with.
if the rod fits, i will blow it through the pipe with some air to make sure it goes all the way.
obviously only works with resin printers due to fine tolerances.
burr that forms on the buildplate needs to be removed before use.
use calipers to confirm the right size of the rod after measuring the hole.
| measurement_rods.stl | 1.1MB |
