Remixed to fit sourced items from Amazon that would arrive was faster than from china.
This cover will fit any MeanWell LRS slim style power supplies.
List of changes made:
➢ Replaced the regular XT60 w/ pcb connectors with more robust XT60E-M that should stand up to abuse better
➢ Extended body 10mm to allow wires to be tucked easier
➢ Enlarged switch recess to accommodate switch used
➢ Adjusted Switch perch to allow easier locking of IEC320 C14 body to printed part
Notes:
➢ Please consult an electrician before wiring this up.
➢ If you choose to solder the wires on the switch like i did please review the pictures and see how you solder should look. It should be smooth and shiny. If your solder job is rough and dull its an indication of a cold solder and can easily break off the terminals or cause shorts.
➢ You can print on the face to allow less supports but having heavy supports on the switch perch made it difficult for the clips to lock it into the body. I tried many times with test pieces and different thickness slices with PursaSlicer but the supports left the perch unusable at certain thicknesses it was either to thick or too thin. I ended up slicing with S3D and it printed much better (even though S3D is ancient it still has the best support algorithm of any slicer..)
BOM:
➢ 350w 24v PowerSupply Amazon
➢ 350w 12v PowerSupply Amazon
➢ Screws m2.5 x8mm for XT60E-M and m3 x 3mm (can also use m3 x 5mm not in this kit) to secure print to MeanWell case Amazon
➢ IEC320 C14 Male Power Socket w Switch Amazon
➢ Recommend using this style of XT60 Amazon (it gives you more to hold when disconnecting so you wont strain the wires)
MeanWellPSCover.stl | 147.9KB |