MDRK Offroad Wheels For Traxxas 1.9 Tires 3D Printer Model
The file 'MDRK Offroad Wheels For Traxxas 1.9 Tires 3D Printer Model' is (stl) file type, size is 912.1KB.
The file 'MDRK Offroad Wheels For Traxxas 1.9 Tires 3D Printer Model' is (stl) file type, size is 912.1KB.
Made some replacement wheels for Traxxas TRX4. The wheels started spinning inside the tires and as I was not keen on gluing them, I decided to create some "beadlock" type rims instead.
The rim consist of 3 parts - the face or the outer part, the locking or inner part and a compression ring. Extras required are 5-6 M2.5x10-12 screws. The compression ring goes inside the tire followed by the other 2 pieces each from either side.
Printed at 0.2 layer height and supports touching bed. 15% grid infill. The mating surfaces are on the bed. Recommend some pre-drilling to get accurate holes - 2 mm for the outer part and 2.5 mm to the inner part.
| MDRK_5spokeDual_out.stl | 818.8KB | |
| MDRK_5spoke_in.stl | 395.1KB | |
| MDRK_5spoke_out.stl | 700.2KB | |
| MDRK_6spoke_in.stl | 415.7KB | |
| MDRK_6spoke_out.stl | 741.2KB | |
| MDRK_compRing.stl | 71.0KB |
