The MDB2Pi is a RaspberryPi HAT which can serve as a MDB master (VMC), as MDB cashless peripheral, or as tracer for MDB Vending Machines. This design is for a housing which fits the Raspberry Pi and the MDB2Pi. There are three variants: normal, flanged and 35mm DIN rail. Just choose the desired bottom stl file to print (the top cover is always the same).
The housing can be used in conjunction with Raspberry Pi B+, Raspberry Pi 2 and Raspberry Pi 3.
UPDATE 2020/01/13: We added a new design which supports the Raspberry Pi 4
Screws:
4 x M2.5x8 Round Head Screw
4 x M2.5x11 Standoff Spacer
4 x M2.5 Screw nut M2.5
The MDB2Pi and a matching screw set are available here: https://www.mdbconverter.com/shop
IMPORTANT: This is a work in progress. Files might change without notice.
Credits:
• s_p_e_x for the original design
• The 3D Raspberry Pi 2 model is from 3D Warehouse - "Raspberry Pi B+" made by "Bill W."
• The 3D Raspberry Pi 4B model is from grabcad - "raspberry-pi-4-model-b-1" made by "Hasanain Shuja"
| MDB2Pi4_Housing.stl | 3.3MB | |
| MDB2Pi4_Housing.zip | 34.7MB | |
| MDB2Pi4_Housing_bottom.stl | 134.4KB | |
| MDB2Pi4_Housing_bottom_DIN_rail.stl | 141.0KB | |
| MDB2Pi4_Housing_top.stl | 249.0KB | |
| MDB2Pi_Housing.stl | 1013.6KB | |
| MDB2Pi_Housing.zip | 33.1MB | |
| MDB2Pi_Housing_bottom.stl | 138.2KB | |
| MDB2Pi_Housing_top.stl | 249.1KB |
