Mcfarlane 89′ Batmobile Steering Kit 3D Printer Model
The file 'Mcfarlane 89′ Batmobile Steering Kit 3D Printer Model' is (stl) file type, size is 138.0KB.
The file 'Mcfarlane 89′ Batmobile Steering Kit 3D Printer Model' is (stl) file type, size is 138.0KB.
This is the Steering kit I created for the Mcfarlane toys 89's batmobile. It requires some cutting of the main body to install, and cutting the axle apart.
print the steering knuckles and control arms at 100% infill for strongest possible set up.
support brackets can be printed as low as 30% without issue. Be careful with final product, as with FDM, wear will occur from operation, and dropping the car down hard can cause stress to the parts.
see how to video here:
https://youtu.be/-DfVnx9fzo8?si=entTwV-acMgsHSRE
If I see anyone selling this kit, I will take this back down, This is for at home use, and for general fans / customizers / action figure dollie lovers. Do not take advantage and ruin it for everyone else.
If you use it tag me on IG with the finished product!
| batmobile_steering_arm_top.stl | 55.0KB | |
| batmobile_steering_block_V4.stl | 64.6KB | |
| batmobile_steering_bottom.stl | 56.9KB | |
| batmobile_steering_driver_S_arm.stl | 162.6KB | |
| batmobile_steering_mount_cap.stl | 47.1KB | |
| batmobile_steering_pass_S_arm.stl | 163.1KB |
