McDonnell Douglas MD-11 3D Printer Model
The file 'McDonnell Douglas MD-11 3D Printer Model' is (stl,step) file type, size is 3.7MB.
The file 'McDonnell Douglas MD-11 3D Printer Model' is (stl,step) file type, size is 3.7MB.
"The McDonnell Douglas MD-11 is an American three-engine medium- to long-range wide-body jet airliner, manufactured by McDonnell Douglas and, later, by Boeing Commercial Airplanes. Based on the DC-10, it features a stretched fuselage, increased wingspan with winglets, refined airfoils on the wing and smaller tailplane, new engines and increased use of composite materials. Two of its engines are mounted on underwing pylons and a third engine at the base of the vertical stabilizer. It also features a glass cockpit that decreases the flight deck crew to two from the three required on the DC-10 by eliminating the need for a flight engineer."
Wikipedia
UPDATE 12/26/2018:
I have now added a cargo version of this model. For the cargo version, you must print all the normal parts, with the exception of the cockpit, top body (forward), top body (aft), and tail body. Then print the cargo versions of these parts, labeled with a "(Cargo)" at the end of the name.
I personally love airplanes, especially this one. While it doesn't fly passengers anymore, you can still see it carrying cargo around the world, taking advantage of the long ranges that it was built for. This model is made of many individual parts, intended to be printed alone and then assembled later. Note there is a fully assembled file, but I would not recommend printing it, as it would have to be a lot smaller and use a lot of support material. I'm not going to stop you, but I'm just sayin'.
For anyone interested in modifying this, please, go right ahead. I have included the STEP file for the project, and have linked the Fusion 360 cloud file here: http://a360.co/2kTjMAZ
| Bottom_Body_Aft.stl | 136.4KB | |
| Bottom_Body_Forward.stl | 128.2KB | |
| Bottom_Nose.stl | 338.2KB | |
| Cockpit.stl | 801.1KB | |
| Cockpit_Cargo.stl | 395.6KB | |
| Engine_1.stl | 648.1KB | |
| Engine_3.stl | 648.1KB | |
| Horizontal_Stablizer_L.stl | 32.8KB | |
| Horizontal_Stablizer_R.stl | 32.8KB | |
| Left_Wing_Inner.stl | 118.9KB | |
| Left_Wing_Outer.stl | 20.6KB | |
| Left_Wing_Supporting_Structure.stl | 213.7KB | |
| Lower_Tail_Body.stl | 141.5KB | |
| MD-11_Assembled.stl | 2.1MB | |
| MD-11_v39.step | 5.0MB | |
| Right_Wing_Inner.stl | 118.9KB | |
| Right_Wing_Outer.stl | 20.6KB | |
| Right_Wing_Supporting_Structure.stl | 226.1KB | |
| Tail_Body.stl | 319.1KB | |
| Tail_Body_Cargo.stl | 78.1KB | |
| Top_Body_Aft.stl | 882.8KB | |
| Top_Body_Aft_Cargo.stl | 46.9KB | |
| Top_Body_Forward.stl | 852.3KB | |
| Top_Body_Forward_Cargo.stl | 44.0KB | |
| Verticle_Stablizer_Assembly.stl | 526.2KB | |
| Window_1.stl | 42.9KB | |
| Window_2.stl | 44.3KB | |
| Window_3.stl | 75.3KB | |
| Window_4.stl | 75.3KB | |
| Window_5.stl | 44.3KB | |
| Window_6.stl | 42.9KB |
