Mazzer Major Single Dose Chute 3D Printer Model
The file 'Mazzer Major Single Dose Chute 3D Printer Model' is (stl,f3d) file type, size is 2.4MB.
The file 'Mazzer Major Single Dose Chute 3D Printer Model' is (stl,f3d) file type, size is 2.4MB.
A Mazzer major cover thant mount instead of the doser and accepts a 28 mm tube as a chute.
The cover is inspired by the ChilesInAdobo's chute, then independently measured and modelled. It resulted in suprisingly similar parts.. :D
At the top, the cover is bolted to the body.
At the bottom, there are adjacent holes at the cover and the gtinder body. You can tap the cover and crew it to the grinder body from the bottom for very secure mounting or just glue there pegs and slide them to the threaded holes of the grinder.
From the motor side, there is a room for grounding wire to be soldered to the tube to minimize static.
Printed standing (as in use) on Prusa Mk3 in PLA with support, then sanded and spray painted with multiple layers of black and transparent acrylic paint.
Works like a charm, still a droplet of water to your beans and some nocking on the tube is a good idea. A bellow would help also.
If anything, a steeper angle of the tube would helt the coffe to slide out.
Enjoy your cup!
| Major_SD_cover.stl | 9.5MB | |
| Mazzer_Major_single_dose_mod_01_v4.f3d | 1.3MB |
