Max’s Antler (from How The Grinch Stole Christmas) 3D Printer Model
The file 'Max’s Antler (from How The Grinch Stole Christmas) 3D Printer Model' is (stl) file type, size is 3.6MB.
The file 'Max’s Antler (from How The Grinch Stole Christmas) 3D Printer Model' is (stl) file type, size is 3.6MB.
This design is based on the antler made by the Grinch for Max in the 60's TV special "How the Grinch Stole Christmas". The antler is intended to be printed hollow (0% Infill) and the two antler parts glued together. All parts should be printed with supports touching the build plate only. The base is aligned with the antler using two #6 x 1/2" flat head screws and glued. Any of the holes can be used to achieve a good fit, but the intent was to align to the forward holes. The strap I used was a tennis shoe lace that was looped and fed downward thru the center slots.
Update 11/26/18 - Added one-piece version of model
| antler_base.stl | 978.1KB | |
| antler_max-a_80.stl | 2.5MB | |
| antler_max-b_80.stl | 922.2KB | |
| antler_max_one-piece.stl | 4.5MB |
