Mavic Air Noise Reduction Tri-Prop 3D Printer Model
The file 'Mavic Air Noise Reduction Tri-Prop 3D Printer Model' is (stl) file type, size is 1.1MB.
The file 'Mavic Air Noise Reduction Tri-Prop 3D Printer Model' is (stl) file type, size is 1.1MB.
I am not responsible for damaged drones
If you do not thing you can print these successfully the first go round then jsut bookmark this page and come back in two months after you have more experience.
Disclaimer- Print and Use at your own risk. if you download these files then you are now bearing sole responsibility of your actions possible. and as always fly safe.
i found it the easiest to print these bad boys upside down.
i would reccommend a much stronger filament than just plain old pla. although the original prototypes were made from just pla and hand sanded to make them sorta balanced.
if anything breaks just use your best repair work with a soldering iron and make sure its balanced or else the motors will overhead due to too much work.
| AntiClockwiseProp.stl | 492.8KB | |
| ClockwiseProp.stl | 492.8KB | |
| SetOf4For200x200.stl | 1.9MB |
