This is a mounting system for a Mavic 3 and Mavic 3 Enterprise drones. Included is a GoPro mounting plate. The quick release mount works on any Mavic 3, including Enterprise versions. The Enterprise only version of the mount requires use of the top mounting screws. The quick release does have screw holes for enterprise drones, but you do not need to use them.
You print the mount, GoPro adapter, and pins separately and super glue them together. The pins help keep it secured. Press and glue the pins into the GoPro end and then glue and sandwich it to the mounting plate.
The Mavic 3 quick release mount needs to be printed standing up like in the picture which supports. The Enterprise one is printed on its top side laying down. I use this mounting system for all sorts of things, not just GoPro's.
also included is a plate that can be modified to mount other things.
There are two size pins, depending on your printer's accuracy making holes.
| GoPro_Adapter.stl | 520.9KB | |
| Mavic3_BB_mount_plate.stl | 201.9KB | |
| Mavic_3_Enterprise_mount.stl | 342.2KB | |
| Mavic_3_quick_release_mount.stl | 1.5MB | |
| Pin_4.8.stl | 64.9KB | |
| Pin_4.9.stl | 65.1KB |
