Matterhorn Candle Mold 3D Printer Model
The file 'Matterhorn Candle Mold 3D Printer Model' is (stl) file type, size is 2.2MB.
The file 'Matterhorn Candle Mold 3D Printer Model' is (stl) file type, size is 2.2MB.
Currently designing some candle molds. This is the first design.
Demolding worked perfectly, eventhough we just used the forms without any vaseline or oil.
Print in which ever Resolution you want, i printed it in 0.3 mm and 0.1 mm and actually prefer the 0.3 mm because you see the layers. If you want a smooth surface go for higher resolution.
How to:
Best search on the internet for instruction how to pour candle wax. If you understand some german I really like this very thorough explanation:
https://www.hongler-kerzen.ch/media/pdf/e4/a3/6d/Hongler_Anleitung_Kerzen_giessen.pdf
You can either hold the mold together with clippers of some kind or with some M4 screws.
Once it's cooled (after several hours, best leave it over night) The molds will stick together a little. To seperate them, just push a knife between the molds and turn it a little. Should come of nicely.
| 02_Matterhorn_P1.stl | 727.3KB | |
| 02_Matterhorn_P2.stl | 4.2MB |
