These sample are all 24mm x 64mm x 2.1mm. Depending on which model you print, you will get three graded layers which are each intended to be a multiple (1,2, and 3) of the layer height you choose to print with. Thus you can see the effect of printing one, two, or three layers thick.
The stand is designed to showcase 16 samples, evenly splayed. I've connected them with a M40x4mm socket cap screw and nut.
The design is stored in OnShape. Should you wish to fiddle with it, this is the link:
| Sampler_-_0.05_Layers.stl | 37.2KB | |
| Sampler_-_0.15_Layers.stl | 37.2KB | |
| Sampler_-_0.1_Layers.stl | 37.2KB | |
| Sampler_-_0.25_Layers.stl | 37.2KB | |
| Sampler_-_0.2_Layers.stl | 37.2KB | |
| Sampler_-_0.35_Layers.stl | 37.2KB | |
| Sampler_-_0.3_Layers.stl | 37.2KB | |
| Sampler_-_0.4_Layers.stl | 37.2KB | |
| Sampler_Stand.stl | 147.0KB |
