Matek M10Q-5883 Halter 3D Printer Model
The file 'Matek M10Q-5883 Halter 3D Printer Model' is (stl) file type, size is 2.5MB.
The file 'Matek M10Q-5883 Halter 3D Printer Model' is (stl) file type, size is 2.5MB.
This is a bracket for the Matek GPS M10Q-5883.
I wanted to be able to remove the GPS easily but not use metal in the construction.
The upper part is attached with the M3 polyamide screw on the side.
An M3 thread must be cut into the upper part after printing.
The LED is clearly visible through the cut-out in the upper part.
I printed it with a 0.25mm nozzle in 0.1mm layers, it can probably also be a little bigger.
| Matek_M10Q-5883-Halter_Oberteil.stl | 3.1MB | |
| Matek_M10Q-5883-Halter_Unterteil.stl | 3.3MB |
