This is a remix from the Master Sword designed by JaredTS486. His design is great, but I didn't want to buy paint or another set of carbon fiber rods. So I modified his to be printed by color and I changed the design for a 3mm center rod. May not be as strong as the original, but this should be display piece anyway.
Here is a list of what I changed:
Changed all vertical rod holes to 3.3mm (opposed to 3.2mm & 6.5mm)
Changed all slanted rod holes for the guards to 3.4mm
Combined Hilt Handle A & B & Bottom into one part
Made the hilt wrappings their own separate part
Cut a slit into the Emblem Half pieces to add an individual part for the gold inlay edges
Cut a bit out of the Hilt Center and made a separate part from the cut out bit
As for the rods, just look up 1 meter 3mm carbon fiber rods and you should find plenty of options. I got mine from windcatcherrc.com, they're a lot cheaper than Amazon if you're willing to forfeit quick shipping.
For specific instructions on how to assemble and what lengths to cut the support rods please refer to the original creator's post: (https://www.thingiverse.com/thing:5177670). Just note that the center rod is 3mm instead of 6mm now.
Happy Printing!
| Blade_Bit.STL | 22.6KB | |
| Blade_Main.STL | 23.7KB | |
| Blade_Tip.STL | 124.4KB | |
| Emblem_Body_Half.STL | 165.2KB | |
| Gold_Edge_Inlay.STL | 25.5KB | |
| Hilt_Butt.STL | 73.2KB | |
| Hilt_Center_Modified.STL | 711.4KB | |
| Hilt_Handle.STL | 22.3KB | |
| Hilt_Jewel.stl | 45.2KB | |
| Hilt_Top_Fastener.STL | 92.1KB | |
| Hilt_Wing_Guard_A.STL | 239.0KB | |
| Hilt_Wing_Guard_B.STL | 245.7KB | |
| Hilt_Wrappings.STL | 348.7KB | |
| Master_Sword_CAD.zip | 39.7MB |
