“Master Cylinder” From The Felix The Cat Cartoons (1960) 3D Printer Model
The file '“Master Cylinder” From The Felix The Cat Cartoons (1960) 3D Printer Model' is (pdf,stl) file type, size is 502.4KB.
The file '“Master Cylinder” From The Felix The Cat Cartoons (1960) 3D Printer Model' is (pdf,stl) file type, size is 502.4KB.
This model was created based on the "Master Cylinder" from the Felix the Cat cartoons. Two versions are supplied, a one-piece body and a body shell with an insert shell and attachable feet (glued). Both versions have arms attached using M3-.05 x 12mm screws. M3 nuts are inserted into the inside pockets of the outer shell for the multi-piece version. In most of the cartoons the character is not shown with feet. They can be eliminated if you want to set the character alone on a flat surface. The outline of the eyes can be done using a Sharpie Ultra Fine marker. I used white model paint for the eyes also. A PDF template of the screen is supplied if you want to use paper cut-outs. The model is supplied with a removable base.
| Master_Cylinder.pdf | 6.9KB | |
| master_cylinder.stl | 465.4KB | |
| master_cylinder_arm-l.stl | 57.3KB | |
| master_cylinder_arm-r.stl | 57.3KB | |
| master_cylinder_base.stl | 261.2KB | |
| master_cylinder_foot.stl | 18.2KB | |
| master_cylinder_insert.stl | 206.2KB | |
| master_cylinder_outer.stl | 351.9KB |
