Mast Kit For Boats 3D Printer Model Free Download

Description Files (14)

Summary

Add some masts to your boat models. These are ideally suited for converting rowboats, ferries and dinghys into sailboats. Included is a range of masts, booms and mounts. Mix-and-match as required. The models are scaled about 1-in-10 and may be resized to suit your application.

When printing with a filament printer:

Print only one mast/boom at a time. Multiple mounts are okay.
Print with the mast/boom oriented upright.
Use a brim for the mast/boom. Brim not required for the mounts.
Make sure that you have good bed adhesion.
Use a least 20% infill.
No supports are required.

After printing:

Clean up, prime and paint.
Attach the mount to your boat using epoxy or other adhesive.
Attach the boom to the mast.
Make a sail from material or other thin stuff and attach it to your mast/boom.
Insert the mast into the mount - use adhesive for a permanent joint.
Add some rigging.

I really like the following watercraft models:

OpenForge Dhingys by devonjones
OpenForge Rowboats by devonjones
Rowboat for Bridge District by Kaybee81
Sailing Dinghy "Rode Neusje" - by CPomeroy

Boom_1_075mm.stl	450.3KB
Boom_2_090mm.stl	450.3KB
Boom_3_105mm.stl	450.3KB
Boom_4_075mm.stl	450.2KB
Boom_5_090mm.stl	450.2KB
Boom_6_105mm.stl	450.2KB
Mast_1_200mm.stl	711.7KB
Mast_2_250mm.stl	711.8KB
Mast_3_300mm.stl	77.9KB
Mast_4_200mm.stl	752.9KB
Mast_5_250mm.stl	752.1KB
Mast_6_300mm.stl	751.5KB
Mount_Round.stl	70.2KB
Mount_Square.stl	71.4KB

Mast Kit For Boats 3D Printer Model

Summary

Tags

You might also like