Mask Adapter For Filter 3D Printer Model
The file 'Mask Adapter For Filter 3D Printer Model' is (stl) file type, size is 3.1MB.
The file 'Mask Adapter For Filter 3D Printer Model' is (stl) file type, size is 3.1MB.
Note: 3D Prints are not safe for use in medical matters or other matters.
I take no responsibility for infections or injuries with the designs provided.
This is a Remis of: " 4246568 "
The parts are not tight and need to be sealed up properly.
This is an adapter for a diving mask to two filters of a ventilator.
There should be a better ventilation compared to a one filter design.
The filters are "intersurgical clear".
The 3 files provide the following models:
Adapter fixed: The adapter has a gap at the connection to the mask but is free of problems.
Adapter tight: The adapter fits tight on the mask but you will need to use " Keep Disconnected Faces " in Mesh Fixes in Cura because some walls may have issues.
Adapter: This is a differend version where the pipes go to the right and the left.
It has the same problems as "adapter tight" and has a bigger gap at the mask so you need to change Cura.
| Adapter.stl | 1.9MB | |
| Adapter_fixed_.stl | 2.8MB | |
| Adapter_tight.stl | 3.1MB |
