Mars Mission Centrifuge Ride System 3D Printer Model
The file 'Mars Mission Centrifuge Ride System 3D Printer Model' is (stl) file type, size is 3.7MB.
The file 'Mars Mission Centrifuge Ride System 3D Printer Model' is (stl) file type, size is 3.7MB.
This model was used within this video: https://youtu.be/ntFNno4lEGA
To build this model you'll need:
1x base
1x bearing mount
1x arm hub
1x 608ZZ bearing (8mm x 22mm x 7mm)
10x Arm Left
10x Arm Right
10x V3.5 Peg
10x Tilt Arm
10x Cabin
20x Cabin Door
10x Screens
Where there's a small hole use 1.75mm filament as a peg.
Note: for the arms, place the peg in the slot (at the end of each arm) and sandwich it together.
Glue the large part of the peg to the back of the tilt arm.
if you have any questions please feel free to ask them here or message me on Instagram @coaster.labs
Happy printing!
| Arms_Mission_Space_Model.stl | 18.0MB | |
| Arm_Hub_Mission_Space_Model.stl | 3.4MB | |
| Arm_Left_Mission_Space_Model.stl | 9.0MB | |
| Arm_Right_Mission_Space_Model.stl | 9.0MB | |
| Base_Mission_Space_Model.stl | 1.8MB | |
| Bearing_Mount_Mission_Space_Model.stl | 766.7KB | |
| Cabin_Door_Mission_Space_Model.stl | 6.1KB | |
| Cabin_Mission_Space_Model.stl | 858.9KB | |
| Screens_Mission_Space_Model.stl | 686.5KB | |
| Tilt_Arm_Mission_Space_Model.stl | 253.3KB | |
| V3_5_peg_Mission_Space_Model.stl | 272.9KB |
