Marking Gauge For HF 40″ Rule – F360 3D Printer Model
The file 'Marking Gauge For HF 40″ Rule – F360 3D Printer Model' is (3mf,stl,f3d,step) file type, size is 1.1MB.
The file 'Marking Gauge For HF 40″ Rule – F360 3D Printer Model' is (3mf,stl,f3d,step) file type, size is 1.1MB.
This remix is designed for the 40" Harbor Freight aluminum rule. While I did completely draw this model in Fusion 360, it is heavily influenced by this model https://www.thingiverse.com/thing:6550203 created by https://www.thingiverse.com/stenokit/designs.
Along with using an M5 brass threaded insert instead of a captured nut, I also added a tension pad to prevent damage to the rule. Install the insert from the back side to lessen the chance it will be pulled out under tension. The knob has a modeled M5 thread that might need to be chased with a tap. Screw the SHCS onto the knob and snug up tightly. It will likely not need any glue, but a drop of CA can be used if necessary.
I have provided Fusion 360 file with User Parameters for the ruler width and thickness if you'd like to use a different ruler. I did not provide User Parameters for any other dimensions, but the full timeline is there so changes can easily be made. I also included a STP file for other CAD programs.
M5 x 5.8 Threaded Insert - https://www.amazon.com/dp/B08T9W17CR
M5 x 12 Socket Head Cap Screws - https://www.amazon.com/gp/product/B07NTYF2FZ/?th=1
| Marking_Gauge_Base.3mf | 25.5KB | |
| Marking_Gauge_Base.stl | 5.6KB | |
| Marking_Gauge_Clamp.3mf | 36.2KB | |
| Marking_Gauge_Clamp.stl | 18.6KB | |
| Marking_Gauge_Knob.3mf | 140.3KB | |
| Marking_Gauge_Knob.stl | 389.5KB | |
| Marking_Gauge_Tension_Pad.3mf | 33.1KB | |
| Marking_Gauge_Tension_Pad.stl | 16.1KB | |
| Marking_Gauge_v5.f3d | 583.2KB | |
| Marking_Gauge_v5.step | 782.3KB |
