Marble Run With Motor 3D Printer Model
The file 'Marble Run With Motor 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'Marble Run With Motor 3D Printer Model' is (stl) file type, size is 2.7MB.
Marble run with a 5V motor that can be powered by USB. For assembly, the screw holes for the motor cover need to be tapped for the 4-40 screws. The track, motor_cover, and lift_gear_backing_plate were designed in Fusion 360 and may need to be scaled 2540%
Parts used:
3/8" ball bearings (9x) https://www.amazon.com/gp/product/B007B2AG3G/ref=ppx_yo_dt_b_asin_title_o05__o00_s00?ie=UTF8&psc=1
5V motor with gearbox (1x)
https://www.amazon.com/gp/product/B074QQB95G/ref=ppx_yo_dt_b_asin_title_o02__o00_s00?ie=UTF8&psc=1
6' USB cable (1x)
https://www.digikey.com/product-detail/en/qualtek/3021011-06/Q366-ND/1531293
Cable tie holder (1x)
https://www.digikey.com/product-detail/en/essentra-components/FTH-40A-RT/RPC1328-ND/3811992
Hardware:
4-40 x 1/2" long socket head cap (2x)
8-32 x 1" long socket head cap (1x)
8-32 hex nut (1x)
| lift_gear_backing_plate.stl | 140.0KB | |
| marble_lift_gear.stl | 3.0MB | |
| motor_cover.stl | 51.5KB | |
| motor_gear.stl | 482.0KB | |
| track.stl | 4.3MB |
