MaraBox 3D Printer Model
The file 'MaraBox 3D Printer Model' is (stl) file type, size is 898.3KB.
The file 'MaraBox 3D Printer Model' is (stl) file type, size is 898.3KB.
MaraBox - a kids-friendly mobile MP3 box controlled by RFID-enabled figurines, cards or other items based on the TonUINO. This music box can be easily handled by very small children from roughly 18 months onwards.
This design combines the pleasing look & feel and robustness of nicely grained wood (bamboo in this case) and the colourful contrast of the plastic casing that hides an eye-catching shine-through Neopixel 24 LED ring.
For assembly, threaded sleeves are inserted into the wooden lid, holding together the assembly nicely by virtue of threaded rods and screw-on caps on the bottom part for ease of access. Most of the electronics fit on the detachable bottom plastic inlay, while the Neopixel ring is nestled inside a three-part assembly in front of the speaker.
For a detailed general description (in German) of the required parts, software and general design and assembly guides, check out Thorsten's website at
https://www.voss.earth/tonuino/
or for a detailed rundown of my build, head to the community forum here:
http://discourse.voss.earth/t/vorstellung-marabox-bambus-3d-druck-neopixel-ring/4608
Notes for makers:
| Bodenplatte.stl | 339.6KB | |
| Gitter_Only_V4.stl | 156.3KB | |
| Korpus.stl | 521.6KB | |
| Lauter.stl | 468.1KB | |
| Leiser.stl | 291.3KB | |
| Lunette.stl | 163.9KB | |
| M_V2.stl | 239.5KB | |
| Next.stl | 488.8KB | |
| Play.stl | 237.0KB | |
| Plug_SD_Card.stl | 70.4KB | |
| Rew.stl | 488.8KB | |
| Verschluss_innen_Lunette.stl | 183.5KB |
