Map From The Princess Bride – Hueforge Print 3D Printer Model
The file 'Map From The Princess Bride – Hueforge Print 3D Printer Model' is (hfp,txt,stl) file type, size is 61.8MB.
The file 'Map From The Princess Bride – Hueforge Print 3D Printer Model' is (hfp,txt,stl) file type, size is 61.8MB.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm. If you're willing to do some maths, you can reduce print times by using a layer height modifier to print the base layers at a taller height.
I printed this on a 0.4 nozzle, which sacrificed a bit of the detail in the lettering. You might be able to get away with a 0.2 nozzle but it might take a lot longer. This was a 17 hour print on a 0.4 nozzle.
Filaments Used:
Swap Instructions:
| princess_bride_map.hfp | 2.0KB | |
| princess_bride_map_describe.txt | 519.0B | |
| princess_bride_map_Front_224x240.stl | 201.0MB |
