A small assortment of GT2 (6mm wide) pulles i designed for a little project i make. I needed specific relations of a motor to a second axle and solved it with those sometimes a bit odd numbered pulleys.
They all have a hole for a NEMA17-Axle (D-Shape, 5mm / 4.5mm)
There are theeth # 21, 24, 26, 28, 31, 32, 35, 36, 40, 41, 44, 50, 53, 55, 80, 125, 192 and 200
If you want to mod your own #of teeth:
1: Calculate needed diameter @ https://www.omnicalculator.com/math/radius-of-a-circle
2mm per Teeth = Circumference in mm
2: Update Radius of the pulley
3: Update angle of Segment (360° / #ofTeeth = angle)
4: Update Radius of the flange (Radius of Pulley + 1mm)
5: Update # of teeth
All these settings are also marked in the comments of the object-Tree in FreeCad
If you need some specific teeth# and dont want to fiddle with freecad, drop me an eMail @ [email protected] for a ready-made version.
| GT2-125T.stl | 3.0MB | |
| GT2-192T.stl | 4.5MB | |
| GT2-200T.stl | 4.7MB | |
| GT2-21T.stl | 167.7KB | |
| GT2-24T.stl | 186.8KB | |
| GT2-26T.stl | 199.3KB | |
| GT2-28T.stl | 212.0KB | |
| GT2-31T.stl | 231.1KB | |
| GT2-32T.stl | 225.1KB | |
| GT2-35T.stl | 244.0KB | |
| GT2-36T.stl | 250.3KB | |
| GT2-40T.stl | 275.3KB | |
| GT2-41T.stl | 281.5KB | |
| GT2-44T.stl | 1.1MB | |
| GT2-50T.stl | 1.2MB | |
| GT2-53T.stl | 1.3MB | |
| GT2-55T.stl | 1.4MB | |
| GT2-80T.stl | 1.9MB | |
| GT2.FCStd | 297.5KB |
