Manual Adjustable Bed For K40 Co2 Laser 3D Printer Model
The file 'Manual Adjustable Bed For K40 Co2 Laser 3D Printer Model' is (stl) file type, size is 130.7KB.
The file 'Manual Adjustable Bed For K40 Co2 Laser 3D Printer Model' is (stl) file type, size is 130.7KB.
It is a adjustable bed frame, derived from this https://www.thingiverse.com/thing:3051286.
I have made some changes to make it fit the extrusion better
These are the additional parts to assemble it:
Aluminum profiles:
2 of 20x20x1 mm and 275mm distance
2 of 20x20x1 mm and 205mm apart
2 of 16x16x1.5 mm and 275mm distance
2 of 16x16x1.5 mm and 205mm distance
4 x 105mm M8 threaded rods
12 M8 nuts
4 M8 washers
4 608zz bearings
4 GT2 8mm pulleys
1 Gt2 belt of 1250 - 1350 mm
Honeycomb for the bed
| Belt_tensioner.stl | 12.6KB | |
| Bottom_support.stl | 243.2KB | |
| Top_support.stl | 195.3KB |
