These are bookstand legs you can attach to a plank and make a stepped shelf. Perfect for manga and paperback books and let you stack them two deep and still be able to see all of them.
Multiple heights uploaded, from 2"-4.5" high, so you can get the right height for whatever books you want to show.
Printer: Creality Ender 3 v2
Slicer: Cura v4
Layer Height: 0.16mm
Infill: 25%
I used a brim, but not needed if you have your printer dialed in.
Model created ins Solidworks and is easily adjustable to various heights. If sizes i uploaded are not right for you, let me know and i can add new ones.
| 2.5_Inch_Center.STL | 55.0KB | |
| 2.5_Inch_L.STL | 24.5KB | |
| 2.5_Inch_R.STL | 24.5KB | |
| 2_Inch_Center.STL | 55.0KB | |
| 2_Inch_L.STL | 24.5KB | |
| 2_Inch_R.STL | 24.5KB | |
| 3.5_Inch_Center.STL | 55.0KB | |
| 3.5_Inch_L.STL | 24.5KB | |
| 3.5_Inch_R.STL | 24.5KB | |
| 3_Inch_Center.STL | 55.0KB | |
| 3_Inch_L.STL | 24.5KB | |
| 3_Inch_R.STL | 24.5KB | |
| 4.5_Inch_Center.STL | 55.4KB | |
| 4.5_Inch_L.STL | 24.7KB | |
| 4.5_Inch_R.STL | 24.7KB | |
| 4_Inch_Center.STL | 55.4KB | |
| 4_Inch_L.STL | 24.7KB | |
| 4_Inch_R.STL | 24.7KB |
