Manfrotto 728 Contact Pads 3D Printer Model
The file 'Manfrotto 728 Contact Pads 3D Printer Model' is (stl) file type, size is 74.6KB.
The file 'Manfrotto 728 Contact Pads 3D Printer Model' is (stl) file type, size is 74.6KB.
Not actually a remix... but I wanted to contribute and these are related. I had a broken contact pad while replacing the clamp bodies on my Manfrotto 728B. I used Frubino's AWESOME replacement clamp bodies. I found that the smallest clamp body didn't clamp quite hard enough (I could still move it by hand with the stock pad).... so, here are 8 sizes of pads. The +0.25mm pad is what worked for me for my smallest clamp. The base clamp "should" be the same size as factory... but the + measurement is from datum, not a confirmed comparison to factory.
Recommend PETG and all perimeters (no infill). Suggest printing them upright... good luck that they all stay stuck to your bed!
| pad+0.05mm.stl | 35.1KB | |
| pad+0.15mm.stl | 35.1KB | |
| pad+0.1mm.stl | 35.1KB | |
| pad+0.25mm.stl | 35.1KB | |
| pad+0.2mm.stl | 35.1KB | |
| pad+0.35mm.stl | 35.1KB | |
| pad+0.3mm.stl | 35.1KB | |
| pad.stl | 35.1KB |
