Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 201.97x200mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Cement Gray Transmission Distance: 0.6
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Cement Gray
At layer #12 (1.04mm) swap to Silver
At layer #18 (1.52mm) swap to Jade White for the rest.
| Mando1_Front_202x200.stl | 96.9MB |
