Mandalorian Helmet Keychains 3D Printer Model
The file 'Mandalorian Helmet Keychains 3D Printer Model' is (stl) file type, size is 103.85 KB.
The file 'Mandalorian Helmet Keychains 3D Printer Model' is (stl) file type, size is 103.85 KB.
Here's a few keychains remixed from the neat Boba Fett by camellinlove. I wanted to have more than 2 color change and needed a version for the Mandalorian. They print at 60 x 45 mm which is a little big so I usually scale them down to 75% which also only takes around 20-30 minutes. The Jango and Boba look the same but they have different layers for different color variation. Did 5 colors for Boba.
I want to add a Sabine style to complete the selection someday.
Use color change feature in your slicer or simply pause at desired layer and change filament.
Color change tip: set the skirt in your slicer to the same height as the model, so the inevitable blob that happens after color change goes there and misses the model.
Update 8/15/20 Finally added the Sabine Wren or female-style helmet.
12/18/20 added a slightly modified version of the Mandalorian helmet (v2) that I think looks a little better.
| Boba_Fett_Keychain.stl |
| Jango_Fett_Keychain.stl |
| Sabine_Wren_Keychain.stl |
| The_Mandalorian_Keychain.stl |
| The_Mandalorian_Keychain_v2_new.stl |
