This is a remix from the original Darksaber published by Adafruit.
I wanted to build a cheaper version, so I made some changes in the electronics.
I used the following components from aliexpress:
The arduino PIN configuration is the following:
I've made changes in 3d design of the blade parts, to print it in two parts
You could follow the original guide in the PDF file.
The code could be downloaded from: https://tinyurl.com/59neab4s
The zip file contains the wav files to copy in the SD. The files must be copied in order, since the mp3 module plays files using the file position (1, 2, ...)
Enjoy it!
| blade-base-1-white.stl | 15.8KB | |
| blade-base-2-white.stl | 26.6KB | |
| blade-cover-1.stl | 1.1KB | |
| blade-cover-2.stl | 684.0B | |
| blade-cover-3.stl | 884.0B | |
| blade-cover-4.stl | 684.0B | |
| blade-tip-1-white.stl | 4.7KB | |
| blade-tip-2-white.stl | 19.2KB | |
| ble-darksaber-propmaker.pdf | 7.8MB | |
| coupler.stl | 105.6KB | |
| emitter.stl | 103.0KB | |
| guard.stl | 241.9KB | |
| hilt.stl | 854.2KB | |
| pommel.stl | 209.8KB | |
| speaker-holder.stl | 96.8KB | |
| stand-bottom-charger.stl | 179.2KB | |
| stand-bottom-holder.stl | 265.9KB | |
| stand.stl | 151.5KB |
