Captured in the Louvre by Cosmo Wenman, November 2012.

I captured this piece in the Louvre, but I processed, printed, and am publishing it in connection with this NPR story: http://www.npr.org/blogs/alltechconsidered/2013/10/11/231450884/3-d-printing-a-masterwork-for-your-living-room Unfortunately, the story did not mention my current Skulpturhalle project, or my forthcoming publication of Venus de Milo or Winged Victory. For more on that, see http://cosmowenman.com

I took 202 photos of this piece in November 2012. The lighting was poor, and I could not get around all sides of it -- I got so-so results processing them with 123D Catch, but recently ran them through ReCap Photo and got much, much better results. I cleaned the webbing between the legs with Meshmixer and Blender and added a base, but I've included the unedited, textured capture as well, which includes portions of the Louvre gallery.

The versions with a base are scaled to roughly match the human scale of the "Female Torso, Esquiline Type" which I've also published. I had both the male and female torsos printed at the same scale, with the male figure at roughly 10 inches tall on an Objet printer. They turned out very nicely and make a nice pair standing side-by-side.

I haven't tried yet, but I suspect both figures will print cleanly in PLA without any supports.

-Cosmo
http://cosmowenman.com
http://twitter.com/cosmowenman

From the Louvre's description:

"This torso is one of a prolific series of ancient replicas which are generally agreed to echo the Diadumenus ("he who attaches" a band around his forehead), a bronze produced c.440-430 BCE by Polyclitus.

Polyclitus was fascinated by the male form and its reproduction according a system of skillful calculations that he set out in his treatise, the Canon. The Diadumenus was the fruit of this intellectual approach, which was of seminal importance in the history of Greek sculpture."

Source: http://www.louvre.fr/en/oeuvre-notices/torso-diadumenus-type