Makita Track Saw Kerf Spacer 3D Printer Model
The file 'Makita Track Saw Kerf Spacer 3D Printer Model' is (stl) file type, size is 738.1KB.
The file 'Makita Track Saw Kerf Spacer 3D Printer Model' is (stl) file type, size is 738.1KB.
The good part of the piece to be cut is under the guide. When it is the other part that is the good one, the thickness of the blade must be taken into account.
This accessory allows you to align the guide with the cutting marks while taking into account the kerf of the blade.
Place the spacers on the guide aligned with the marks and place the guide in the correct place.
Once the guide is in place, remove the spacers and cut!
I used a M3x6mm screw to secure the spacer in the correct location.
| Guide_Base.stl | 1.7MB | |
| Guide_Kerf.stl | 383.5KB |
