I wanted to use my Makita RT0700 attached to my workbench. So I attached the plunge base of the Makita RT0700 to a 10mm piece of MDF. Therefore I used M8 rods and the fixing-STL.
In order to manipulate the plunge base from the top of the work bench, I designed a few parts. The parts assemble together with M6 bolts and nuts, some Aluminium tube 8mmx6mm and a M6 turnbuckle.
The Aluminium tube fits in the joints to prevent wear. The plunge_arm-STL are used instead of the hand-knobs of the plunge base.
In order to reduce the hole for the router-bits, I made the ring_base-STL, which fits nice and snugg in the foot of the plunge base. I made a hole in the MDF, in which the ring-STLs fit. They can be secured with M3 bolts and nuts to the base ring.
| Base_1x.stl | 288.5KB | |
| connection_1x.stl | 79.6KB | |
| fixing_4x.stl | 138.4KB | |
| Plunge_arm_2x.stl | 72.6KB | |
| ring_base_1x.stl | 165.1KB | |
| ring_big.stl | 140.7KB | |
| ring_medium.stl | 138.5KB | |
| ring_small.stl | 117.9KB |
