This is a Handle made to hold the wall Battery mounts designed by Noggin011 and make a 4 battery carrier. This requires 8 #8x5/8 sheet metal screws and 2 battery clips linked below.
I print this with 1mm wall thickness and 3 wall layers and 5 top/bottom layers, 20% in fill and standard quality slice with cura
I printed this in PLA but if your going to use this where it gets hot, like a work vehicle you'll likely want to print it with a more heat tolerant filament like PETG.
The Battery clips can be found here. he did a good job and I don't see the need to redesign the wheel https://www.thingiverse.com/thing:4738258
I made a new 3 wide carrier to hold 6 batteries It uses the same printing settings and hardware as the 2 wide version. You will need 6 #8 x 5/8 sheet metal screws
| Makita_Handle_v2.stl | 119.0KB | |
| Makita_Handle_XL_v3.stl | 148.1KB |
