Makita 18V Battery Terminal 3D Printer Model
The file 'Makita 18V Battery Terminal 3D Printer Model' is (stl) file type, size is 13.5KB.
The file 'Makita 18V Battery Terminal 3D Printer Model' is (stl) file type, size is 13.5KB.
Makita 18V battery terminal
I was not happy with the existing designs on Thingiverse so I made my own. It is inspired from https://www.thingiverse.com/thing:863257 and https://www.thingiverse.com/thing:2156290.
I used 1 mm thick aluminium for the metal tabs. The slot is 24 mm wide. Cut two pieces sized 23.7 x 26 mm. Make a 90 degree bend at 16 mm. Insert the metal tab into the battery terminal and drill 3mm holes through the aluminium. Then attach using 10 mm M3 screws and nuts.
The terminal is designed to fit https://www.thingiverse.com/thing:1857196 and https://www.thingiverse.com/thing:352094
| Makita_battery_terminal.stl | 72.6KB |
