MakerSlider Camera Slider 3D Printer Model
The file 'MakerSlider Camera Slider 3D Printer Model' is (scad,stl) file type, size is 127.7KB.
The file 'MakerSlider Camera Slider 3D Printer Model' is (scad,stl) file type, size is 127.7KB.
NOTE: Version 2.0 of the MakerSlider is called the Cinemaker Pocket Dolly and is on Thingiverse at http://www.thingiverse.com/thing:42521
This is an Arduino-controlled video camera slider that you can fit in your trunk and attach to a tripod. It uses makerslide rails for the linear motion. Aside from the aluminum, its parts can all be printed on a 3D printer (so far).
The slider is still a work-in-progress, but as a manual camera slider can be used as-is. Some improvements in the near-term include stronger endcaps, and a tripod mount that will not slip. (Note: I've begun work on a motorized version of the slider. The subplate.stl file is a plate that mounts a NEMA 17 motor to the standard aluminum carriage).
In the future, the MakerSlider will use stepper motors for full hands-off automation.
Note: much of the design ideas are taken from Bart Dring's original makerslide camera slider project at http://www.buildlog.net/wiki/doku.php?id=ms:ms_slider
| endcap.scad | 2.0KB | |
| endcap.stl | 294.6KB | |
| endcap_neoprene.stl | 315.3KB | |
| grblshield_spypoint.scad | 2.4KB | |
| grblshield_spypoint.stl | 23.2KB | |
| motor_bottom_mount_adapter.scad | 1.3KB | |
| motor_bottom_mount_adapter.stl | 164.5KB | |
| slotted_neoprene_washer.scad | 800.0B | |
| slotted_neoprene_washer.stl | 69.7KB | |
| subplate.scad | 2.3KB | |
| subplate.stl | 350.3KB | |
| tapercube.scad | 1.0KB | |
| tripod_mount_universal.scad | 1.6KB | |
| tripod_mount_universal.stl | 488.0KB | |
| tripod_mount_washer.scad | 120.0B | |
| tripod_mount_washer.stl | 82.0KB |
