This is a Laser Cut Business Card Holder, however I have uploaded STL's so you can 3D Print it as well. It was designed around using 3mm Acrylic Sheet and as you can see the color variants make for a really cool project. I think you could use transparent filament as well and product similar effects. If you do 3D Print one please share your "make" so we can see how it turns out :)
I used M3x12mm screws on my (four stack) holder. SHCS are used in the photo however they are being replaced by FHSC as soon as I have time to countersink the Front plate. The Mid Section is stackable, adjust the screw length based on the number of Mid Section (2 Mids use a 12mm screw).
If you do not have a countersink I suggest Button Head Screws, and would also suggest Stainless Steel or cad plated over black oxide I used. If you print this and use BHSC just turn the countersunk side inward so the screw has a flat face to sit on.
FYI: The DFX file do not look correct in the preview, however, I have downloaded them directly from this site and verified them, that are indeed correct. If you download them and they don't translate correctly please let me know...
Edit: 4-25-2016, Added photo of holder with Flat Head Screws.
BC_Holder_Back.dxf | 14.6KB | |
BC_Holder_Front.dxf | 15.3KB | |
BC_Holder_Mid.dxf | 15.2KB | |
Stuff_-_Back.stl | 211.2KB | |
Stuff_-_Front.stl | 311.3KB | |
Stuff_-_Mid.stl | 212.4KB |