I drove over my kid's RC car and crushed a front wheel. Designed this one on Fusion 360 and it seems to fit pretty well. It's not an exact replica, but good enough.
The tire came off the old wheel and fit here pretty well.
All files included so you should be able to change anything in Fusion 360.
Watch the 4 lips/ridges when putting the tire on. One of mine split a little - not sure if it was a mis-calibrated printer or maybe the design needs a fillet or better design where the ridges meet the barrel of the wheel.
I wanted to make the wheel pretty tough, thus the wide ribs in the spokes. You could probably get by with less material there.
This is my first wheel design, so if it's whacky, that's why.
The pictures include an original orange wheel and then mine made in the tan PLA+. I know that mine looks pretty sad, but I think I was having 3D printer trouble when I made it.
| Baja_Beast_Front_Wheel_v3.3mf | 276.3KB | |
| Baja_Beast_Front_Wheel_v3.f3d | 171.2KB | |
| Baja_Beast_Front_Wheel_v3.step | 146.8KB | |
| Baja_Beast_Front_Wheel_v3.stl | 289.7KB |
