Mahjong (travel Edition) 3D Printer Model
The file 'Mahjong (travel Edition) 3D Printer Model' is (stl) file type, size is 20.2MB.
The file 'Mahjong (travel Edition) 3D Printer Model' is (stl) file type, size is 20.2MB.
This year's christmas present for my mom. Thought I'd share it with you.
A standard set of 144 Mahjong tiles.
The case measures roughly 180x155mm (without the hinges and therefore should hopefully also be printable on the Prusa MINI).
The tiles are ~14x19mm and when printed upside down with layerheight 0.2mm you can switch filament always after 2 layers to achieve the coloration. I used white and red, blue and green in different orders and then switched back to white. The number tiles only need two additional colors
The hinges can be attached with 2 x M3x5mm socket Cap Screws and M3 nuts (i recommend additional glue), and need 6 x M3x40mm socket Cap Screws for the latch mechanism and to connect the two case halfes.
| V1_mahjong_case_bottom_partA_1x.stl | 40.7MB | |
| V1_mahjong_case_bottom_partB_1x.stl | 11.6MB | |
| V1_mahjong_case_top_partA_1x.stl | 41.7MB | |
| V1_mahjong_case_top_partA_text_1x.stl | 810.8KB | |
| V1_mahjong_case_top_partB_1x.stl | 3.4MB | |
| V1_mahjong_hinges_bottom_2x.stl | 3.0MB | |
| V1_mahjong_hinges_top_2x.stl | 2.6MB | |
| V1_mahjong_latch_2x.stl | 52.2KB | |
| V1_mahjong_tiles_bamboo_4x.stl | 7.5MB | |
| V1_mahjong_tiles_bonus_1x.stl | 7.8MB | |
| V1_mahjong_tiles_characters_4x.stl | 4.7MB | |
| V1_mahjong_tiles_dots_4x.stl | 8.2MB | |
| V1_mahjong_tiles_honours_4x.stl | 5.6MB |
