Mahjong Rack & Pusher (Extra Large) 3D Printer Model
The file 'Mahjong Rack & Pusher (Extra Large) 3D Printer Model' is (skp,stl,3mf) file type, size is 457.6KB.
The file 'Mahjong Rack & Pusher (Extra Large) 3D Printer Model' is (skp,stl,3mf) file type, size is 457.6KB.
Extra large Mahjong racks and pushers. These are designed to fit the largest "Size 8" 39 mm × 30 mm × 23 mm (1+9⁄16 in × 1+3⁄16 in × 7⁄8 in) size Mahjong tiles.
In order to fit on on my printer (BambuLab X1C) the parts are split into 3 sections (a, b & c).
There are also 2 variants of both rack part 'a' and pusher part 'a' to allow for embedding magnets directly in the print. The magnets are optional but help keep the pusher arm connected to the rack. You can also print the regular version and glue magnets in the recessed holes (or leave the magnets out entirely).
The included slicer files have a pause at the correct place so that you can press a round 6 mm x 2 mm magnet in the hole before letting the printer print over the top of it to lock it in place.
| mahjong_pusher.skp | 51.4KB | |
| mahjong_pusher_a.skp | 48.2KB | |
| mahjong_pusher_a.stl | 34.2KB | |
| mahjong_pusher_abc_hidden_magnet.3mf | 41.5KB | |
| mahjong_pusher_a_hidden_magnet.3mf | 32.1KB | |
| mahjong_pusher_a_hidden_magnet.skp | 42.9KB | |
| mahjong_pusher_a_hidden_magnet.stl | 41.8KB | |
| mahjong_pusher_b.skp | 19.1KB | |
| mahjong_pusher_b.stl | 2.6KB | |
| mahjong_pusher_c.skp | 27.9KB | |
| mahjong_pusher_c.stl | 17.8KB | |
| mahjong_rack.skp | 24.7KB | |
| mahjong_rack_a.skp | 33.3KB | |
| mahjong_rack_a.stl | 28.4KB | |
| mahjong_rack_a_hidden_magnet.3mf | 34.8KB | |
| mahjong_rack_a_hidden_magnet.skp | 38.1KB | |
| mahjong_rack_a_hidden_magnet.stl | 36.0KB | |
| mahjong_rack_b.3mf | 28.1KB | |
| mahjong_rack_b.skp | 42.0KB | |
| mahjong_rack_b.stl | 5.2KB | |
| mahjong_rack_c.3mf | 28.7KB | |
| mahjong_rack_c.skp | 41.7KB | |
| mahjong_rack_c.stl | 6.6KB | |
| mahjong_tennons.3mf | 28.4KB | |
| mahjong_tennon_x4.skp | 15.3KB | |
| mahjong_tennon_x4.stl | 684.0B |
