Should fit around a standard buffer tube. The model is not entirely 3D printable as it does use some parts from Lowe's. Some Parts may require supports, I believe the body does. Of course this isn't exactly the same as the PRS stock, but it's close enough.

Update #1: 09/01/17
I printed the body last night and found that the slots for the tube, bolt, and buffer tube were too small. I'm testing larger diameter holes to fix the issue. Should be done by 09/03/17.

Update #2: 09/04/17
Full Body Printed, slid onto buffer tube like a pro. Steel tube and bolts slid into body as designed now. Found that the cheek rest is most definitely going to need some sort of channel or slot to strengthen it much like the butt pad. The single bolt is definitely not going to be enough for prolonged use or use at a higher position. I'm probably only going to print one more body for testing purpose, the next body will hopefully be the last rendition.

Known Issues:

• Knobs may need washers
• Need a way to lock in the stock to the buffer tube
• Cheekpad not very sturdy, especially at higher positions.

BOM: [ All can be aquired at Lowe's ]
5/16" x 3" Bolt [ 124mm & 74mm ]
3/8" Steel Rod [ 2 x 93mm ]
1/2" OD x 3/8" ID Steel Tube [ 2 x 75mm ]
5/16" Nylock Nut x 2

*Remixed version available that is easier to print.