A magnetic lightswitch cover for UK Standard single gang lightswitch. Useful if you use hue bulbs, zigbee switches or otherwise want to dissuade kids or partners from using the physical switch - while remaining accessible just in case!
Should work on most UK standard lightswitches.
NOTE: If your lightswitch uses caps for the screws, you may need to remove these. In this case, the magnets are likely not strong enough to bind to the screws alone, but I've had success in popping another magnet onto the first with a bit of CA glue - they should inset into the screw holes and connect with the screw to give a good fix, and remain largely flush with the surface of the switch.
| single_gang_cover.stl | 16.7KB |
