Magnetic Toilet Paper Holder V1 3D Printer Model
The file 'Magnetic Toilet Paper Holder V1 3D Printer Model' is (stl) file type, size is 484.8KB.
The file 'Magnetic Toilet Paper Holder V1 3D Printer Model' is (stl) file type, size is 484.8KB.
Magnetic Toilet Paper Holder v1
It holds the paper with magnetic locking. You can easily change the paper with one hand. Shaft works in both directions, up and down.
The shaft is magnetically connected to the body on the right side. You can bend it up and down with a little force. Replace the paper and return it to its original position.
It is possible to use more 18x2 magnets, one on each side is enough.
I designed the magnet slots to compress the magnet by force. This situation may differ from another 3D printer due to calibration differences. It may be narrow or a little wide.
You can use support. Printing with the Creality K1 Max took 3.5 hours.
You need some magnets, bolt and nut
2x 18x2mm round magnet
1x m3x15mm bolt
1x m3 nut
( Attach the magnets in a position where they attract each other.)
You can screw it to the wall or stick it with double-sided tape.
if you want to support
https://www.etsy.com/listing/1699942421/magnetic-toilet-paper-holder-bathroom
| body.stl | 456.8KB | |
| mil.stl | 984.5KB |
