Magnetic Tablet / Phone Holder 3D Printer Model
The file 'Magnetic Tablet / Phone Holder 3D Printer Model' is (stl) file type, size is 64.4KB.
The file 'Magnetic Tablet / Phone Holder 3D Printer Model' is (stl) file type, size is 64.4KB.
A simple magnetic mount for tablets and smartphones. The inclination may be adjusted using an M3 screw and nut, and the whole base can be mounted in any plain surface with a double-sided tape, or using an M5-size screw.
You will need four strong round neodymium magnets (4mm high x 10mm diameter) to be set inside the "magnetic base" part - just snap them inside and attach it to the middle part using an M3 screw (8mm long).
No supports needed!
Bill of materials:
4 neodymium magnets (4mm x 10mm)
1 M3 x 8mm screw
1 M3 x 15mm screw
1 M3 hexagon nut
1 adhesive metal pad - those shipped with magnetic phone holders
I also used a thin EVA piece glued to the magnetic base, preventing slips.
If you'd like to remix this design (a v-slot version is in the oven), feel free to drop a comment!
| tablet_base.stl | 105.5KB | |
| tablet_magnets.stl | 345.5KB | |
| tablet_middle.stl | 369.4KB |
