Magnetic Stirrer | Magnetrührer 3D Printer Model
The file 'Magnetic Stirrer | Magnetrührer 3D Printer Model' is (stl) file type, size is 21.0KB.
The file 'Magnetic Stirrer | Magnetrührer 3D Printer Model' is (stl) file type, size is 21.0KB.
Some time ago I built my first magnetic stirrer.
This consisted of a wooden cabinet and took four motors.
Today I thought I could build a single one.
So I created a new smaller housing which can be printed in a short time.
It has enough space to accommodate a socket, a switch, an LED and a speed control.
The housing of the fan I have completely removed only to use the motor.
On this I have glued a neodymium magnet.
The motor is attached to the floor of the housing with hot glue.
Also cables and the circuit are thus attached
Unfortunately, I do not have a proper stirrer, I have small neodymium magnets arranged next to each other with shrink tubing.
| MagStirrerBase.stl | 255.1KB | |
| MagStirrerTop.stl | 12.0KB |
