DO YOU LOVE PRESSING DOWN THE END OF A PEN?

Well, then this Fidget-Toy is for you!
It doesn't has the "klick-in" part but it's as loud as a normal Pen when pressed continuously! AMAZING!!!

It also doesn't rely on old Spring-Technology like a Pen, instead it uses modern Magnetic-Repulsion-Force to spring right back up!

Interested? Then print it, assemble it and annoy your soundings by having fun with it!

Extras you need:

• a 3D Printer of your trust
• 4x 6mm x 3mm circular neodymium magnets
• a 5mm Hex key
• a bit of strength and sensitivity (emotionally & physically)

Settings

• Your standard print settings
• use a Brim when you have trust issues with adhesion
• for maximum roundness check (on Cura) "Use Adaptive Layers ☑"

Assembling
Do a dry assembly first without magnets (for testing reasons)

1. Load the Barrel, aka put the Triger in the big opening of the Main-Body (orientation should be obvious)
2. Screw the screw in
3. Be happy if it fits
4. Disassemble everything again
5. Slap the magnets in the parts, if they refuse to obey and fall out, use Glue

   • !!! Make sure that you put them in the right orientation in, so that the parts repel each other like kids and veges.

6. Repeat step 1. to 3.

You can adjust the position of the screw to accommodate your pressing preference or strength.

Feel free to feel oblige to lave a like and a make if you made and liked it :)