Magnetic Paper Towel Holder V1 / Kitchen / Home Decor / Home Living 3D Printer Model
The file 'Magnetic Paper Towel Holder V1 / Kitchen / Home Decor / Home Living 3D Printer Model' is (stl) file type, size is 531.3KB.
The file 'Magnetic Paper Towel Holder V1 / Kitchen / Home Decor / Home Living 3D Printer Model' is (stl) file type, size is 531.3KB.
Magnetic Toilet Paper Holder v1
It holds the paper with magnetic locking. You can easily change the paper with one hand. The shaft runs up and down in both directions.
The shaft is magnetically connected to the body on the right side. You can bend it up and down by applying a little force. Replace the paper and return it to its original position.
It is possible to use more 18x2 magnets, I recommend using at least 3 to hold the spindle and paper weight.
I designed the magnet slots to compress the magnet with force. This may differ from another 3D printer due to calibration differences. It may be narrow or slightly wide.
You can use support. It took 5.5 hours to print with the Creality K1 Max.
You need some magnets, bolts and nuts
3x 18x2mm round magnets
1x m3x15mm bolt
1x m3 nut
(Attach the magnets so that they attract each other.)
You can screw it to the wall or stick it with double-sided tape.
if you want to support
https://www.etsy.com/listing/1687490420/magnetic-paper-towel-holder-kitchen
| main_body.stl | 450.6KB | |
| shaft.stl | 1.1MB |
