Magnetic Latch / Lock / Handle For Sapphire Pro Enclosure Or 5mm Doors 3D Printer Model
The file 'Magnetic Latch / Lock / Handle For Sapphire Pro Enclosure Or 5mm Doors 3D Printer Model' is (stl) file type, size is 87.8KB.
The file 'Magnetic Latch / Lock / Handle For Sapphire Pro Enclosure Or 5mm Doors 3D Printer Model' is (stl) file type, size is 87.8KB.
Designed this to replace the ugly lock/handle that comes together with the original Sapphire Pro Enclosure. Pretty straight forward replacement, however, hardware is a little bit different than the original one (M3 nuts take from the original package).
If using in another project other than original Sapphire Pro enclosure, take into account that the holes for the lock are 21mm apart from each other.
You'll need:
PS: ALL screw measurements are taking into account full screw length (including head).
PRINTING INSTRUCTIONS
USE 0.2 LAYER HEIGHT!!
| Glass_Knob.stl | 135.5KB | |
| Magnetic_Lock_A.stl | 79.8KB | |
| Magnetic_Lock_B.stl | 66.2KB |
