Magnetic Handsaw Miter Guide 3D Printer Model
The file 'Magnetic Handsaw Miter Guide 3D Printer Model' is (3mf,stl) file type, size is 26.9KB.
The file 'Magnetic Handsaw Miter Guide 3D Printer Model' is (3mf,stl) file type, size is 26.9KB.
A simple magnetic miter saw guide for using hand saws... will work with both pull or push type saws. is sized for 4" (american) store bought lumber (3-5/8") but it could easily be used for larger or smaller pieces. Just put your favorite quick clamp on it and get sawing.
Magnet holes are sized for a light press fit of 15x3 neodymium magnets, either with or without holes... if you get the type with holes and the 4mmx12.5mm screws, I included holes long enough to accommodate those too... but you could just use flat magnets and a bit of CA glue for extra stick.
Let me know if you want a different size, or angle... this one is set to 90 and 45... I would make this a strong print if you plan to keep it for a while, so something like 4 perimeters and at least 25% infill so it will hold up to clamping. I am printing mine in PLA+ but PETG would work well too.
| magnetic_saw_guide.3mf | 16.1KB | |
| magnetic_saw_guide.stl | 58.1KB |
