i quickly created a fishing set, all the commercial ones had strange fish forms.
Each of the fished has one 6x3 (6mm diameter 3mm heigt) magnet embedded
(this was what a had on hand) should be a tight fit
The fishing rold uses a screw or bolt.
The fishes a svgs from:
https://svgsilh.com/de/tag/Fisch-5.html
you might have to scale down the rod if you bed is smaller than 300x300mm
either
| MagnetFishes_v1_MagnetFishes_v1_Body10_MagnetFishes_v1.stl | 431.1KB | |
| MagnetFishes_v1_MagnetFishes_v1_Body1_MagnetFishes_v1.stl | 669.2KB | |
| MagnetFishes_v1_MagnetFishes_v1_Body2_MagnetFishes_v1.stl | 159.9KB | |
| MagnetFishes_v1_MagnetFishes_v1_Body3_MagnetFishes_v1.stl | 1.3MB | |
| MagnetFishes_v1_MagnetFishes_v1_Body4_MagnetFishes_v1.stl | 163.9KB | |
| MagnetFishes_v1_MagnetFishes_v1_Body5_MagnetFishes_v1.stl | 1.1MB | |
| MagnetFishes_v1_MagnetFishes_v1_Body6_MagnetFishes_v1.stl | 267.1KB | |
| MagnetFishes_v1_MagnetFishes_v1_Body7_MagnetFishes_v1.stl | 158.0KB | |
| MagnetFishes_v1_MagnetFishes_v1_Body8_MagnetFishes_v1.stl | 425.6KB | |
| MagnetFishes_v1_MagnetFishes_v1_Body9_MagnetFishes_v1.stl | 164.1KB | |
| Stab_Fishe_v1b_Stab_Fishe_v1_Body2_Stab_Fishe_v1.stl | 266.1KB |
